Configuring Cisco SPA504g Business Phone

Modified on Tue, 28 Mar, 2023 at 10:29 PM

Configuring the Phone to Register

* Start up the phone and identify its IP Address using the menu key on the phone, go to the Network option and press the Select button.
* Point your browser to the web interface of the phone: (for example http://192.168.1.133)

* Click on the "Admin Login" link, and then click on the "Advanced" link at the top of the page to access the phone's advanced administration page
* Now you need to configure the phone to register. Click on the "Ext1" tab, and configure as follows:

* In the "Proxy and Registration" section, set the "Proxy" field to: sip.voiphome.co.uk

* In the "Subscriber Information" section:

1. Set the "Display Name" field to your name
2. Set the "User ID" field to the your SIP User Name
3. Set the "Password" field to the SIP Registration Passowrd
4. Set the "Use Auth ID" field to "no"

* In the "Dial Plan" section, set the "Dial Plan" field to: [x*].

* Adjust the audio parameters. Click on the "SIP" tab and, in the "RTP Parameters" section, set the "RTP Packet Size" field to 0.020

* Click the "Submit All Changes" button at the bottom of the page and your phone will restart. After restarting, the phone will register.